Telvonic SYSTEMSProduction test guides for Wi-Fi, PON and RF.
Practical, vendor-neutral guides from our engineers on calibrating, testing and equipping connectivity production lines.
What sets your station's output? Enter your RF test time.
See boards per hour, the slowest step, and whether a faster test, a faster robot or one more shield box would help.
Open the calculatorWi-Fi 7 production testing
320 MHz channels, 4096-QAM limits and three times the RF chains — what Wi-Fi 7 means for calibration, verification and cycle time.
Read the guide Fibre / PON · 6 min readGPON & XGS-PON ONT test checklist
Optical power and sensitivity, OLT registration, OMCI, traffic, voice and Wi-Fi — every stage an ONT must pass before it ships.
Read the guide RF test · 6 min readChoosing an RF shield box
Isolation targets you can calculate, 6–7 GHz coverage, absorbers, filtered I/O, and manual versus pneumatic boxes.
Read the guide Rental · 5 min readRent or buy test equipment?
A simple break-even method, the costs people forget, rent-to-own, and what to check in a rental agreement.
Read the guide RF test · 7 min readHow to choose a vector network analyzer
Frequency range for your data rate, port count, dynamic range at production speed, calibration and connectors.
Read the guide Signal integrity · 8 min readDAC and AEC cable testing
Passive cables as channels, active cables as links: the measurements, the faults each one catches, fixtures and production stations.
Read the guide