Telvonic SYSTEMSTurnkey production test lines. From spec sheet to stable yield.
We combine the right instruments, shield boxes, fixtures and Line Manager software into complete production lines — sized to your volume and validated on your floor.
Wi-Fi, GPON and cellular on one line — one team, one software layer, one record per unit.
Start from the product you're shipping.
Every line is custom, but most start from one of these. Combo devices simply combine them under one test plan.
Wi-Fi router, mesh & AP lines
8-DUT calibration stations with chipset-specific flows, EVM / mask / sensitivity verification and throughput tests.
Fibre ONT & ONU lines
16-DUT racks (two tiers of eight) with PON tester, optical power meter, DCA and production OLT — optical, protocol and traffic in one pass.
4G / 5G CPE, FWA & modules
Non-signalling calibration, signalling verification, IMEI and SIM checks — with Wi-Fi on the same line for FWA routers.
IoT & RF module lines
Automatic lines with 6-axis robots loading pneumatic RF fixtures, AOI, tape & reel and MES traceability from tray to reel.
High-speed cable & VNA test
A cable test system with VNA, 192-port switch matrix, e-cal and automation for DAC, AEC and connectors, plus analyzers from 8.5 to 110 GHz.
Four building blocks. Split to hit your cycle time.
RF calibration
Wireless testers and shield boxes running chipset-specific calibration and verification, many DUTs in parallel.
Throughput & functional
Traffic across WAN, LAN and wireless, plus port, LED, button, USB and voice checks.
PON or cellular
Optical power and sensitivity with OLT, or cellular calibration and signalling with network emulators.
Final QC & pack
Config write, MAC / serial / IMEI verification, label print and MES hand-shake before packing.
Before, during and long after launch.
From the first feasibility question to the tenth replicated line — and every upgrade after that.
Feasibility & test strategy
Test coverage, design-for-test reviews, cycle-time models and budget estimates before you commit.
Line design & integration
Station layout, instrument selection, fixtures, shield boxes, RF paths and software — built and dry-run.
Installation & validation
On-site installation, golden-unit correlation, GR&R studies and operator training.
Line replication
Identical stations for new lines or factories, with the same software and limits for consistent results.
Retrofit & upgrades
Add Wi-Fi 7, XGS-PON or 5G to an existing line, or move legacy stations onto Line Manager.
Calibration & AMC
Instrument calibration, spares, remote support and annual maintenance contracts.
Every line runs on one software layer.
Instruments from any vendor in, traceable results to your MES out.
Share your product spec. Get a line proposal.
Include the chipset, technologies and target volume. We'll reply with a station plan and budget.
